Specially developed for the joining of veneers which are exposed to high temperatures and tensions during the further processing (e.g. wrapping or membrane-press technology). These veneers are spliced with urea-glues applied to the edges. This glue-application can be done with the pre-glueing machine KUPER KLM or with the preglueing device integrated in the FL/INNOVATION II.
Specific features
- integrated glue-application, ready to be connected to the water-cooling device RACK 1100
- solid steelbase construction
- resistant PUR paint
- start-stop function via light-sensor
- disc-drive infeed
- direct-drive plastic chains transport
- patented slide rail system
- extremely narrow, individually powered heating zone
- clearly arranged operating panel for control of all main operating elements
Technical Data
Throat depth 1000 mm
Veneer thickness approx. 0.4 to 1.5*mm (*=other thickness on request)
Veneer length from approx. 350 mm
Veneer strip width from approx. 45 mm
Feed speed approx. 20 - 55 m/min
Length of heating zone 1200 mm
Operating voltage 400 V 50 cycl 3 Ph.
Total connected load approx. 9 KVA
Average power consumption approx. 5 KW
Air consumption approx. 5 NL / 6 bar
Floor space 2270 x 1870 x 1470 mm
(+66) 2712 0898
